No. | Brand | P | t | k | J | G | C | N | Z |
SCH2216 | INA | - | - | - | - | - | - | - | - |
BK1516 | INA | - | - | - | - | - | - | - | - |
HK1816-2RS | INA | - | - | - | - | - | - | - | - |
HK3012 | INA | - | - | - | - | - | - | - | - |
HK4518-RS | INA | - | - | - | - | - | - | - | - |
SCE1212-PP | INA | - | - | - | - | - | - | - | - |
SCH2212 | INA | - | - | - | - | - | - | - | - |
HK6032 | INA | - | - | - | - | - | - | - | - |
SCE57 | INA | - | - | - | - | M6x1 | 25.7 kN | 11,5mm | - |
SCE2220-S367 | INA | - | - | - | - | - | - | - | - |
HK4516 | INA | - | - | - | - | - | - | - | - |
HK1210-AS1 | INA | - | - | - | - | M6x1 | - | - | - |
HF1012 | INA | - | - | - | - | - | 9.55 kN | - | 58.4 mm |
HK6012 | INA | - | - | - | - | - | - | - | - |
BK3020 | INA | - | - | - | - | - | - | - | - |
SCE1012-PPR | INA | - | - | - | - | - | - | - | - |
HK2010 | INA | - | - | - | - | - | - | - | - |
HFZ040708 | INA | - | - | - | 150 mm | - | - | - | 62.8 mm |
SCE2212 | INA | - | - | - | - | - | - | - | - |
SCE3410 | INA | - | - | - | - | M10X1 | - | - | - |
HK2210 | INA | - | - | - | - | M6 | - | 11,5mm | 23.3 mm |
SCE228 | INA | - | - | - | - | M6x1 | 52.5 kN | - | - |
INA SCH1416 Drawn Cup Needle Roller Bearings | A:50 mm; d:31.75 mm; C0:11.2 kN; H2:130 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PH206N-; Z:19 mm; J:121 mm; B:38.1 mm; A1:28 mm; |
0.787 Inch | 20 Millimeter x 1.024 Inch | 26 Millimeter x 0.787 Inch | 20 Millimeter INA HK2020-2RS-AS1 Drawn Cup Needle Roller Bearings | Bearing Part Number:626; Height H(mm):20 ~ 30; Bearing Retained:No; Number of Bearings:Double; Type:Bearings with Housin; Lateral Width L(mm):36; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Bearing Material:[Steel] Steel; Size (mm):0.787 Inch | 20 Millimeter x 1.024 Inch | 26 Millimeter x 0.787 Inch | 20 Millimeter ; |
INA BK2016 Drawn Cup Needle Roller Bearings | Unit Body Material:Cast Iron; Seal:Triple seals; Fit:J7; RoHS:6; Stroke:No; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):21300; Diameter series symbol:Medium Load; |
INA HK4516 Drawn Cup Needle Roller Bearings | C Chamfered:Not Provided; Number of Bearings:Double; Holder Surface Treatment:Not Provided; Lateral Width L(mm):53; Height H(mm):20 ~ 30; Bearing Used:Deep Groove Ball Bea; Housing Material:304 Stainless Steel; Seals:VV (Non-Contact Rubb; Bearing Retained:No; Shape:T-Shaped; |
INA BCE88 Drawn Cup Needle Roller Bearings | L:163 mm; J:126 mm; H:47.6 mm; N:14mm; G:R1/8"; N1:21 mm; Designation of bearing:ES207-22G2; d:34.92 mm; Recommended tightening torque for set screw:8 Nm; d1:51.1 mm; |
INA BK2216 Drawn Cup Needle Roller Bearings | Brand:NTN; Da max:14 mm; Radial clearance class:C3; Fatigue limit load, Cu:0.03 kN; ra max:0.3 mm; rs min:0.3 mm; Max operating temperature, Tmax:130 °C; Mass:0.005 kg; d:5 mm; Static load, C0:0.68 kN; |
INA SCE48-P Drawn Cup Needle Roller Bearings | Characteristic cage frequency, FTF:0.4 Hz; e:0.33; d:65 mm; Fatigue limit load, Cu:33.9 kN; Characteristic inner ring frequency, BPFI:8.38 Hz; Static load, C0:343 kN; Characteristic outer ring frequency, BPF0:5.62 Hz; rs min:2.1 mm; da min:77 mm; b:9.2 mm; |
INA HK 1214 RS Drawn Cup Needle Roller Bearings | Stroke:No; Surface Treatment:No; Machining:Oil-free type; Accessory:No Cover; RoHS:6; Seal:Nitrile; Days to Ship:9 Days; Bearing Unit, Type:Irregular Shape Flan; Basic Load Rating, Static Rating(N):23300; Grease Type:Standard Grease; |
HK0709 INA Drawn Cup Needle Roller Bearing 7x11x9mm
HK0709 INA Drawn Cup Needle Roller Bearing 7x11x9mm - Drawn cup type needle roller bearing with open end 7mm Inside x 11mm outside x 9mm wide
INA HK0709 Needle roller bearings - Nodes bearing
INA HK0709 bearing, drawn cup needle roller bearings witn open ends, Dimensions: 7mm x 11mm x 9mm, Cr: 3100N, C0r: 2950N, Limiting Speeds:33000
INA HK0709 Needle Roller Bearing, Caged Drawn Cup, Outer
INA HK0709 Needle Roller Bearing, Caged Drawn Cup, Outer Ring and Roller, Steel Cage, Open End, Metric, 7mm ID, 11mm OD, 9mm Width, 31000rpm
Drawn cup needle roller bearings - HK 0709
Radial shaft seal with a low cross-sectional height, single lip. G 7x11x2 S. In addition to the information provided on this page, consider what is provided under
Drawn cup needle roller bearings with open ends - HK0709
Drawn cup needle roller bearings with open ends HK0709, to DIN 618/ISO 3245. Radial load Not sealed Grease lubrication Oil lubrication Small design
INA Needle Roller Bearing, Drawn Cup, Bore Dia. (In
Looking for INA Needle Roller Bearing, Drawn Cup, Bore Dia. ... Item # 4ZZW4; My Part #; Mfr. Model # HK0709; Catalog Page # 142; UNSPSC # 31171512
HK0709 INA Drawn Cup Needle Roller Bearing 7x11x9
HK0709 INA Drawn Cup Needle Roller Bearing 7x11x9 HK Series - Open Ends. Drawn Cup Needle Roller Bearings have a deep thin-walled outer ring with
INA (Schaeffler) - HK0709 - Motion Industries
Buy INA (Schaeffler) Drawn Cup Needle Roller Bearings HK0709 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
INA HK0709 Drawn Cup Needle Roller Bearings Video