| Gates Micro-V Serpentine Belt for 1988-1989 Chevrolet C3500 5.7L V8 vs | D1:138.3 mm; Nlim:4,200 rpm; da min:87 mm; Characteristic rolling element frequency, BSF:4.65 Hz; Fatigue limit load, Cu:43.3 kN; Mass:5.21 kg; k:5 mm; D:160 mm; Characteristic outer ring frequency, BPF0:5.59 Hz; e:0.34; Nref:3,600 rpm; d2:91.9 mm; Characteristic cage frequency, FTF:0.4 Hz; rs min:2.1 mm; B:55 mm; Static load, C0:467 kN; ra max:2 mm; Y0:1.96; Radial clearance class:C4 Special; Characteristic inner ring frequency, BPFI:8.41 Hz; |
| Gates Micro-V Water Pump Alternator Serpentine Belt for 1986 Chevrolet vs | Outer Diameter (mm):47; a:20 mm; Size (mm):35x47x10; Width (mm):10; D:47 mm; d:35 mm; C:10 mm; Bearing number:3807 ZZ; B1:10 mm; Bore Diameter (mm):35; |
| Dayco Drive Belt Tensioner Pulley for 1993-1995 Audi 90 2.8L V6 Engine vs | C:21 mm; pagina del prodotto del produttore:Click here; da max:47 mm; UNSPSC:31171504; Numero articolo del produttore:6307; rs min:1.5 mm; capacità di carico dinamico:33500 N; Carico statico di base (C0):19,1 kN; Da max:72 mm; Capacità massima / Fessura di riempimento:No; Descrizione lunga:35MM Bore; 80MM Outs; Diametro esterno (mm):80; Frequenza caratteristica della gabbia, FTF:0.38 Hz; numero massimo di giri (olio):10000 rpm; |
| Timing Belt Kit Serpentine Belt for 97-00 Audi Volkswagen 1.8L L4 DOHC 20v | Adhesive:Epoxy; Weight per Filter (lbs):1.0000; Efficiency:Beta 6{c} >= 1000 (I; End Cap:Corrosion Resistant; Collapse Rating:3000; Media Type:Microglass supported; O.D.:1.74; Quantity per Carton:1; Seal Material & Type:Viton O-Ring; Length:6.88; Flow Direction:Out/In; By-Pass:None; Max Temp (F):225; OEM Part Number:HP48HL7-6MB; Recommended Change Out (psid):25; |
| Dayco AC Drive Belt Idler Pulley for 1994-1998 Toyota T100 2.7L 3.4L L4 V6 vs | Db - Cup Backface Backing Diameter:228.09 mm; K - Factor7:1.82; R - Cone Backface To Clear Radius1:9.650 mm; G1 - Heat Generation Factor (Roller-Raceway):490.5; a - Effective Center Location3:-24.6 mm; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:-2 mm; db - Cone Backface Backing Diameter:162.05 mm; D:260.350 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:41400 lbf; C0 - Static Radial Rating:232000 lbf; |
| Dayco Main Drive Serpentine Belt for 2010 Jeep Commander 5.7L V8 Accessory vs | Minimum Buy Quantity:N/A; Manufacturer Name:TIMKEN; Weight / US pound:0.01; Category:Bearings; Inventory:0.0; Product Group:B00308; |
| Bando Rib Ace V-Ribbed Serpentine Belt for 2010-2014 Acura TSX 3.5L V6 - vs | C:16,513 mm; B:22,225 mm; Marchio:Timken; Diametro del foro (mm):50,8; d:50,8 mm; R:3,5 mm; Larghezza (mm):22,225; Bearing number:368A/362AB; Diametro esterno (mm):88,9; D:88,9 mm; Dimensione (mm):50.8x88.9x22.225; T1:8,887 mm; |
| Gates Micro-V Fan Alternator Serpentine Belt for 1987 Oldsmobile Cutlass vs | B:24 mm; Size (mm):90x140x24; Angle (α):25 °; Basic dynamic load rating (C):65,2 kN; Outer Diameter (mm):140; Weight:1,58 Kg; d:90 mm; Width (mm):24; Bearing number:7018 A; D:140 mm; a:45,2 mm; C:24 mm; Basic static load rating (C0):63,3 kN; (Grease) Lubrication Speed:5100 r/min; Bore Diameter (mm):90; |
| No. | Brand | J | L | h | b | H | R | a | T |
| 2016 | - | - | - | - | - | - | - | - | 46 mm |
| 6K685 | - | - | - | - | - | - | - | - | - |
| 1988-1989 | - | - | - | - | - | - | - | - | - |
| 1992-1993 | Dodge | - | 387.35 mm | 40.481 mm | - | 222.25 mm | - | - | - |
| 1985-1987 | - | - | - | - | - | - | - | - | - |
| F-150 | - | 202 mm | - | - | - | 250 mm | - | - | - |
| 2.5L | - | 225 mm | 164 mm | - | - | - | - | - | - |
| 1987-1988 | - | - | - | - | - | - | - | - | - |
| 1986 | - | - | - | - | - | - | - | - | - |
| 1994-1998 | - | - | - | - | - | - | - | - | - |
| 1999-2002 | - | - | - | - | - | - | - | - | - |
| 1987 | - | - | - | - | - | - | - | 45,2 mm | - |
| 2000-2004 | - | 130 mm | 162 mm | - | - | - | - | - | - |
| 99-03 | - | - | - | - | - | - | - | - | - |
| 97-00 | - | - | - | - | - | - | - | - | - |
| 1986 | - | - | - | - | - | - | - | 20 mm | - |
| 1993-1995 | - | - | - | - | - | - | - | - | - |
| 1995-1997 | - | - | - | - | - | - | - | - | - |
| 1970-1971 | - | - | - | - | - | - | - | - | - |
| V6 | - | - | - | - | - | - | 112 mm | - | - |
Dayco Main Drive Serpentine Belt for 1992-1993 Dodge W250 5.2L 5.9L V8 vs Video
Serpentine V-Belts vs Multi-Ribbed Belts
Oct 19, 2020 — Unlike traditional V-belts, serpentine belts allow for more complex yet compact belt routing. A tighter belt routing driven by a single belt is ...
Tech Talk: "What's the difference?" - Serpentine Belts vs V- ...
Jun 15, 2021 — Yes. There is a certain nostalgic look to those smaller pulleys, and yes, the deeper v-belt does (somewhat) assist with keeping the belt aligned ...
Fan Belt? Alternator Belt? Serpentine Belt? Similarities and ...
Sep 3, 2014 — A serpentine belt is simply a longer version of a grooved V-belt. It may or may not have grooves on both sides. Instead of being specific to a ...
Switching From V-Belts to Serpentine - MotorTrend
Nov 25, 2014 — The decision was made to switch to a serpentine belt system rather than continue with V-belts, and a serpentine kit was ordered from March ...
What is the difference between a V belt and a serpentine belt?
May 27, 2017 — It's debatable but serpentine belt systems are considered superior to Vbelt driven systems. I'm sure there are plenty of cases of Vbelts ...
Serpentine or V-Belt: Driving Your Accessories
Jun 9, 2015 — Even though a serpentine belt is wider and flatter than a traditional V-belt, it is still lighter than a V-belt. Not only is the serpentine belt ...
V-belt vs. Serpentine - benefits for each configuration?
Jan 25, 2003 — Ghetto, that's still a V-Belt, just a wider one. It drives the alternator. A serpentine setup means that there is one belt that drives every ...
Serpentine belt vs V belt—what's the difference? - Jerry
A serpentine is a wider, thicker, updated version of its predecessor, the V-belt. You're more likely to find a V-belt in an older model, while ...
All The Different Types Of Belts In A Typical Engine | GMB Blog
You can find the serpentine belt on the front or side the engine. All serpentine belts are ribbed to increase contact surface with the drive and driven pulleys.
Serpentine Belts vs. V-Belts - CVF Racing
Serpentine belts are used in new vehicles due to the fact that they are easier to maintain and are less complicated to install. V-Belts are still used on ...